Today, we did the Molar Volume Lab. Here's what happened.
First, we cut a piece of magnesium in half and measured its length because we would not be able to find the mass on a scale. Magnesium is .01085 g/cm. Our piece of magnesium was 2.5 cm. Then, we tied a piece of copper wire around the magnesium ribbon so that the magnesium would not float around in the eudiometer. (http://www.flickr.com/photos/hc1011/5258241891/) The eudiometer is a gas collection tube, measuring gas by water displacement. We poured 10 ml of HCl and 100 ml of water into the eudiometer. The temperature of the tap water was 21.3°C. Room temperature was 22.2°C and the barometric pressure was 30.11 inHg (we have to convert it to mm). We put the cork attached to the copper wire and magnesium at the open end. We then flipped the eudiometer over, safely and carefully, and put the cork end into a beaker with water and clamped the eudiometer so it would stay up. We watched as the magnesium reacted with the HCl and created bubbles of hydrogen. (http://www.flickr.com/photos/hc1011/5258850050/) Slowly, the water was going into beaker and leaving space at the top of the eudiometer. While we waited for the reaction to finish, we recorded the room temperature and the barometric pressure at room temperature. Once the reaction stopped bubbling, we took the eudiometer to the fume hood and measured the volume of the gas. The volume of the gas was 27.4 ml of hydrogen. (http://www.flickr.com/photos/hc1011/5258850358/)
This lab is due Wednesday. Our test for this unit is Friday. Sorry about the pictures, they won't show up. So I included the links to them.
This has been Kaitlyn. (with a Y!) Thank you, thank you very much. :)
The next scribe will be Matt P!
A peek inside the everyday happenings of our classroom. This is an interactive learning environment for students and parents in my Honors Chemistry 173 class. This ongoing dialogue is as rich as YOU make it. Visit often and post your comments freely.
Showing posts with label Unit 6. Show all posts
Showing posts with label Unit 6. Show all posts
Monday, December 13, 2010
Friday, December 10, 2010
More About Gas Equations and...Ice Cream
We first started class off today by being told by Mr. Lieberman that we will not be doing our lab today, but we will be doing it on Monday instead.
Next we went over our pre-lab. I want to thank Matt P. with some help from Ben A. for explaining to us how to answer each question. Here is how to do them:
1) Make an equation to help find the pressure of hydrogen: 19.8+x=746 and when you solve for x you get 726.2 mmHg of H2.
2)Use your answer from #1 and you will make an equation following the form of PV/T=P2V2/T2. The equation is 726.2(31)/295=760V/273. Solve the equation for the volume of hydrogen at STP and you should get .274 L.
3)This is just a simple stoich problem: .028g Mg x 1 mole Mg/24.3g x 1 mole H2/1 mole Mg =.001167 moles of H2
4) Use your answers from numbers 2 and 3 to get the molar volume of hydrogen at STP: .274/.001167 = 23.5 L/ 1 mole.
Next, after going over the pre-lab, we continued going over notes. The main thing we talked about in our notes is that there are three equations that come from the equation PV=nRT. Those three equations are:
-PV=(g/mm)RT
-mmP/RT=g/v and g/v equals density
-mm=DRT/P~ a way is to remember this is dirty pee...get it..
Also, a reminder, make sure you are keeping up with your worksheets which are due on the day of the test which is on Friday, the day before break.
Then we did an awesome experiment that we were actually able to eat. We made chocolate ice cream! The ingredients were sugar, milk, whipping cream, chocolate syrup, and what made the magic happen, liquid nitrogen. It was and looked a little clumpy, but it actually tasted really good. And that was the end to another good day in chem.
The next scribe will be......Kaitlin Y!
Next we went over our pre-lab. I want to thank Matt P. with some help from Ben A. for explaining to us how to answer each question. Here is how to do them:
1) Make an equation to help find the pressure of hydrogen: 19.8+x=746 and when you solve for x you get 726.2 mmHg of H2.
2)Use your answer from #1 and you will make an equation following the form of PV/T=P2V2/T2. The equation is 726.2(31)/295=760V/273. Solve the equation for the volume of hydrogen at STP and you should get .274 L.
3)This is just a simple stoich problem: .028g Mg x 1 mole Mg/24.3g x 1 mole H2/1 mole Mg =.001167 moles of H2
4) Use your answers from numbers 2 and 3 to get the molar volume of hydrogen at STP: .274/.001167 = 23.5 L/ 1 mole.
Next, after going over the pre-lab, we continued going over notes. The main thing we talked about in our notes is that there are three equations that come from the equation PV=nRT. Those three equations are:
-PV=(g/mm)RT
-mmP/RT=g/v and g/v equals density
-mm=DRT/P~ a way is to remember this is dirty pee...get it..
Also, a reminder, make sure you are keeping up with your worksheets which are due on the day of the test which is on Friday, the day before break.
Then we did an awesome experiment that we were actually able to eat. We made chocolate ice cream! The ingredients were sugar, milk, whipping cream, chocolate syrup, and what made the magic happen, liquid nitrogen. It was and looked a little clumpy, but it actually tasted really good. And that was the end to another good day in chem.
The next scribe will be......Kaitlin Y!
Thursday, December 9, 2010
Gas gas gas
Half of our classmates were gone today...
because of ....... don't know...
Denna wasn't here today so I am the scriber for today
We started the class with a demontration. Mr. Liberman put some melted dry ice into a styrofoam box and put a manometer,this manometer has a empty metal ball, into that box. And the pressure went down because the moles which is in that ball starts to move slow. Through this experiment we could make sure that when temperature goes down then pressure goes down and temperature goes up then pressure goes up.
After Mr. Liberman finish off with this experiment, we wanted him to dump the melted dry ice on the floor.
And he did....Twice :)
The melted dry ice started to move around the floor like when we spill some water on the hot pan.
We were all excited about the movement of these little particles.
Also Mr. Liberman dumped the ice over my head accidently!
Korri screamed and called 911 immediately
So that's why I am in hospital right now...
hehe I'm just kidding~
Actually he poured vapor over my head. It just feel coooool~
Today, we learned about the Ideal Gas Equation.
The three important gas laws, Boyle's, Charles', and Avogadro's, derived relationships between two physical properties of a gas, while keeping other properties constant.
When we rearrange to a more familiar form we get PV = nRT
*In this equation R is the gas constant.
The conditions 0 *C and 1 atm are called Standard Temperature and Pressure (STD).
At STR R = (1 atm x 22.414L) / (1 mol x 273 K)
R = .0821
And experiments show that at STP, 1 mole of an ideal gas occupies 22.414 L.
If you know the formula with STD, we could convert to different forms.
The important thing is the value of R won't change!
Here is an example
What is the volume(in liters) occupied by 49.8g of HCl at STP?
T = 0*C = 273K
P = 1 atm
n = 49.8g x (1 mol / 36.45g HCl) = 1.37 moles
V = (1.37 mol x 0.0821 x 273 K) / (1atm)
V = 30.6L
I hope you guys understand what I explained...
If you want more information about the ideal gas equation, I recommended to visit :
Today's homework is a Worksheet and Pre-Lab
The next scribe will be Denna M.
Subscribe to:
Posts (Atom)